Associations

After creating Pre-Advance Conditions or Post-Advance Actions, PowerSteering administrators need to associate them with Gates in order to activate them. This can be done through the "Associations" tab on the Conditions page:

To create an Association:

1. Select Conditions from the "Configuration" section of the Admin menu:

   

   Click thumbnail to play.

2. Select the "Associations" tab:

   

3. Select the Add Association button:

   

4. Enter the details for your new Association:

   

   1. Project Type: Choose the Project Template of the Gated Work that the association will be applied to.

   2. Gate: Choose the Gate that the association will be applied to.

   3. Pre-Advance Condition: Choose which Pre-Advance condition will apply to the Gate.

      Note: Only one Pre-Advance condition can be chosen per Gate.

   4. Post-Advance Action: Choose which Post-Advance Action(s) will apply to the Gate.

      Note: Multiple Post-Advance actions can be chosen per Gate.

5. Select the Save button.

After clicking Save, the new association can be found in the table under the "Associations" tab. The Pre-Advance Condition's criteria can be seen after expanding the Gate on the Gated Work Summary page:

Note: Associations can be edited at any time by selecting the Edit button. Also, they can be deleted by selecting the Condition's checkbox and then selecting the "Trash" icon .
After an Association is deleted, the Conditions that were attached to any Gated Works will be removed.